Ladybug Photo Prop


Photography used with permission by Maryellen Lally-Godinez. Multiple Blessings Photography. All Rights Reserved.

This little cutie really was inspired by my recent fun with the Turtle Shell Photo Prop. I promised that I would remove my pattern for the turtle shell prop–but I never said I wouldn’t make anything else using the pentagons! Btw, if you want to make this as a turtle…. (I’ll let the rest click into place as I move on.)

;0)

So I started experimenting with ladybugs and what do you know!! This prop is just as cute as a little ladybug.

The pentagon pattern is exactly the same process as the turtle pentagon. The only difference is the color of yarn and where the color changes happen.

Top (or right side) of ladybug pentagon motif.

Bottom (or wrong side) of ladybug pentagon motif.

So grab your hooks and yarn and let’s get crocheting!

For a FREE pattern download, be sure to visit my Craftsy shop!

Craftsy.com

Materials required:

  • Hook sizes G and E
  • 4 ply yarn in red and black
  • Tapestry needle

Note: To make this prop larger, you would need to size your hook up. For each hook size up, you can add approximately half to three-quarters of an inch to the finished project.

Stitches used:

  • sl st (slip stitch)
  • ch (chain)
  • dc (double crochet)
  • fpdc (front post double crochet: complete the stitch around the post of the next indicated stitch by inserting the hook from front to back to front around the post)
  • v-st (v-stitch: [dc, ch 1, dc] in same space)

Pentagon Motif: Make 6: 3 SMALL spotted pentagons and 3 LARGE spotted pentagons.

Stitches used: sl st (slip stitch), ch (chain), dc (double crochet), fpdc (front post double crochet: complete the stitch around the post of the next indicated stitch by inserting the hook from front to back to front around the post), v-st (v-stitch: [dc, ch 1, dc] in same space).

Using black, Ch 3, sl st to 1st ch to form a ring.

Round 1: Ch 3 (counts as dc), v-st 4 times in ring, dc in ring, ch 1, sl st to top of ch 3. (10 dc)

For SMALL spotted pentagon only, change color to red. For LARGE spotted pentagon, continue this round with black. Round 2: Ch 3 (counts as dc), fpdc around ch 3 from round 1, fpdc around next dc, *v-st in next ch 1 sp, fpdc around next dc, fpdc around next dc, rep from * around to 1st ch 1 space, dc in 1st ch 1 sp, ch 1, sl st to top of ch 3. (10 fpdc, 10 dc)

For SMALL spotted pentagon, continue round as normal. For LARGE spotted pentagon, change color to red. Round 3: Ch 3 (counts as dc), fpdc around ch 3 from round 2, fpdc around next dc, fpdc around next dc, fpdc around next dc, *v-st in next ch 1 sp, fpdc around next dc, fpdc around next dc, fpdc around next dc, fpdc around next dc, rep from * around to 1st ch 1 space, dc in 1st ch 1 sp, ch 1, sl st to top of ch 3. Finish off. (20 fpdc, 10 dc)

Round 4: Ch 3 (counts as dc), fpdc around ch 3 from round 3, fpdc around next 5 dc, *v-st in next ch 1 sp,  fpdc around next 6 dc, rep from * around to 1st ch 1 space, dc in 1st ch 1 sp, ch 1, sl st to top of ch 3. Finish off. (30 fpdc, 10 dc)

Weave in all tails before moving on to next motif.

Assembly:

Start with your center motif. Arrange the other 5 motifs around the center and prepare to assemble.  (Use pic as a general guide)

You will be working the assembly with only your center motif. All flanking motifs will be joined by one side to the center first, (we will join the rest later).

Take your center motif and any flanking motif and place them wrong sides together.

Note: Keep in mind that your two motifs will be places wrong sides together, so the back loops will be the two loops closest to each other.

Using an E hook and your red yarn, join in ch 1 space of both motifs. Working back loops only, *sl st across to next ch 1 sp. Sl st in ch 1 space and arrange your next flanking motif—wrong sides together, with the center motif. Sl st in ch 1 space of new motif and center motif. Continue from * until all flanking motifs are joined by one side to center motif.

Just like with the turtle prop, the next thing we will need to do is to sew up the rest of the seams between each flanking motif.

There are two ways you can do this. Remember: when you join your motifs you want to make sure you are holding them wrong sides together.

The hard way: Since your yarn is already attached to your hook, simply sl st that first seam between the flanking pentagons closed–taking care to hold the motifs wrong sides together, finish off. Insert your hook into both ch 1 spaces at the base (close to the center pentagon) of the next two flanking pentagons. Attach your contrasting yarn with a sl st, sl st in the back loops only to the end of the pentagons and finish off. Continue around until all seams have been slip stitched closed. Weave in all those loose ends.

The easy way: The other way you could do it would involve a tapestry needle. Since your yarn is already attached to your hook, sl st that first seam between the flanking pentagons closed, finish off. Thread your tapestry needle with a long length of contrasting yarn and simply whip stitch the rest of your seams shut–taking care to whip-stitch in the back loops only and making sure that all of your motifs are being held wrong sides together. In order to move your needle, simply thread it under your project, hiding the extra yarn in the undersides of your stitches.

When you’ve finished sewing all the seams, your project should look like this:

If you’ve joined your motifs the hard way, now would be a good time to weave in all those loose tails in the center. Don’t worry about the loose tails that are to the outside of the shell because we’ll crochet over them when we do the border.

Now we’re on the home stretch! The only thing left to do with this blanket is the border and the neck.

In order to put a border around our motifs, we’ll need to join red with a sl st in any ch 1 space located in a point of a pentagon (in other words, NOT in a valley part where you have two ch 1 spaces side by side), ch 2,  dc in the same space as join, *dc all the way across to the next ch 1 space (8 dc), 2 dc in the ch 1 space, 2 dc in the next ch 1 sp, dc all the way across to the next ch 1 space (8 dc),  2 dc in the next ch 1 sp, continue from * around, join in the top of the ch 2. Finish off and weave in any remaining tails.

To create the neck part of this blanket, you need to find the top pentagon and count the top most 8 stitches. (I covered this in the turtle prop so I’ll just reuse that pic below to show you how to find the stitches.)

Find the center 8 stitches of the top pentagon to attach the neck part to your ladybug prop.

Sl st in the 8th stitch, ch 3, dc across the next 7 sts, ch 3, turn.

dc across the next 7 sts, ch 3, turn.

dc across the next 7 sts, finish off and weave in tail.

All that’s left is to make a hat with two antenna’s.

Ladybug Photo Prop Hat

Materials Needed:

  • Size G (4.5mm) crochet hook
  • 4 ply yarn in black
  • Tapestry needle for weaving in ends.

Finished Sizes:
Preemie/12” (Baby/14”)

Ch 4, sl st into 1st ch to join rnd.

Rnd 1: With black: Ch 1, 8 sc into center of rnd, sl st to 1st sc to end rnd — 8 sc.

Rnd 2: Ch 1 (counts as 1st sc), sc in same st, *2 sc in next st; rep from * around, sl st to beginning ch to end — 16 sc.

Rnd 3: Ch 1 (counts as 1st sc), sc in same st, sc in next st, *2 sc in next st, sc in next st; rep from * around, sl st to beginning ch to end — 24 sc.

Rnd 4: Ch 1 (counts as 1st sc), sc in same st, sc in next 2 sts, *2 sc in next st, sc in next 2 sts; rep from * around, sl st to beginning ch to end — 32 sc.

Rnd 5: Ch 1 (counts as 1st sc), sc in same st, sc in next 3 sts, *2 sc in next st, sc in next 3 sts; rep from * around, sl st to beginning ch to end — 40 sc.

Rnd 6: Ch 1 (counts as 1st sc), sc in same st, sc in next 4 sts, *2 sc in next st, sc in next 4 sts; rep from * around, sl st to beginning ch to end — 48 sc.

For size 12”/Preemie skip to Rnd 8. For size 14”/Baby proceed to next rnd.

Rnd 7: Ch 1 (counts as 1st sc), sc in same st, sc in next 5 sts, *2 sc in next st, sc in next 5 sts; rep from * around, sl st to beginning ch to end — 56 sc.

Rnd 8: Ch 1 (counts as 1st sc), sc in each st around, sl st to beginning ch to end — 48 (56) sc.

Repeat Rnd 8 until hat measures 4.5 (5.5)” or until desired length.

Fasten off and weave in ends.

Antenna (make 2)

Use two stitch markers to mark where to place the antenna’s.

Attach black yarn with a sl st, ch 10, sc in 3rd ch from hook, sl st down the length of the antenna, sl st around post of the st on hat where attached. Fasten off and weave in tails.

When you’re all done, your prop should look like this:

I hope you’ve had fun with this project. If you make one and want to share your pics, I’D LOVE TO SEE THEM! Pop on into our facebook group and post away!

About these ads

Tagged: , , , , , , , , , ,

28 thoughts on “Ladybug Photo Prop

  1. Cheryl Wood June 23, 2014 at 9:06 pm Reply

    Do I need to buy these patterns to sell and/or use them?

    Like

    • Tanya Naser June 23, 2014 at 10:31 pm Reply

      The ladybug pattern is a freebie :)

      Like

      • Cheryl Wood June 27, 2014 at 5:51 pm

        Ok, but the download (free) comes with the bee and turtle patterns as well and a disclaimer on the side about selling this product. I am confused on whether or not I am allowed to make it & use and/or sell these items. I don’t want to get in trouble, or get anyone else in trouble :)

        Like

      • Tanya Naser June 27, 2014 at 6:02 pm

        lol. You are free to make and sell any of my patterns!! I only ask that you not resell the pattern or use any of my photos. Have fun and I wish you the best of luck with your sales!!

        Like

  2. Ladybug Photo Prop | My Meanderings November 22, 2013 at 11:02 am Reply

    […] Ladybug Photo Prop. […]

    Like

  3. Teresa June 21, 2013 at 5:36 pm Reply

    I’m thinking of making this for my cousin to use in her photog business, but i have a ?. it says how to make it larger, but doesn’t say approx what size this pattern fits as written

    Like

    • Marissa June 21, 2013 at 5:46 pm Reply

      As written this prop will fit a newborn up to around 10 pounds :) It can be used for an older child as written but the photog will have to be creative about placement because it won’t be long enough to cover both the bottom and the shoulders.

      Like

  4. Gail Carmody May 8, 2013 at 5:59 pm Reply

    I’m actually making this as a prop for my own photographer friend, and I can’t wait for him to see it! It is turning out ultra super cute! Thank you so much for the idea, I really love it. :))

    Like

    • Rinat Reeves May 17, 2013 at 9:52 pm Reply

      Tell me how it went :)

      Like

  5. Nichole October 6, 2012 at 6:46 pm Reply

    Are the hat & prop attached or does it just look that way in the photos?

    Like

    • Marissa October 6, 2012 at 6:58 pm Reply

      They can be attached if you’d like–with a button–but they are two parts :)

      Like

  6. Denise M. Jackson September 7, 2012 at 12:55 pm Reply

    Adorable pattern. How are u keeping the antenna sticking up?

    Like

    • Marissa September 7, 2012 at 1:38 pm Reply

      The antenna stay up on their own ;)

      Like

  7. anonymous August 4, 2012 at 2:31 am Reply

    How do we know which side is the wrong side? Confused with joining. :(

    Like

    • Marissa August 4, 2012 at 11:00 am Reply

      The photos at the top of the post describe the right and wrong sides of the motif :)

      Like

  8. DeAnna June 2, 2012 at 8:58 pm Reply

    Awwwwhhh so sweet.

    Like

  9. Brona March 5, 2012 at 5:19 pm Reply

    Maybe I missed it…but what is a prop?
    Thanks

    Like

    • Marissa March 5, 2012 at 6:10 pm Reply

      A prop is something you would use with a photographer.

      Like

  10. Giraffe Photo Prop « HodgePodge Crochet February 28, 2012 at 9:01 pm Reply

    [...] like with the ladybug prop, the next thing we will need to do is to sew up the rest of the seams between each flanking [...]

    Like

  11. Nicole February 26, 2012 at 9:08 pm Reply

    I love this! Can I make this to sell? I’m sorry if you’ve already answered that somewhere, but I couldn’t find that information. Either way, thanks so much for this pattern! It’s super cute and I’m sure I’ll find someone to make it for!

    Like

    • Marissa February 27, 2012 at 11:28 am Reply

      I’ve put the pattern up for anyone interested in making one. What you decide to do with it is totally up to you! You are more than welcome to sell anything you find here and I wish you the best of luck in your endeavors!!

      Like

      • Nicole February 27, 2012 at 11:33 am

        Thanks so much!

        Like

  12. Leigh Ann February 25, 2012 at 10:15 pm Reply

    This is SO cute :) As soon as someone has a baby girl I’m gonna make one of these!!

    Like

  13. Marilyn Harmon February 23, 2012 at 4:40 pm Reply

    Thanks! I have a turtle and lady bug pattern already, but this one is different.

    Like

  14. Joan Wilson February 22, 2012 at 9:33 pm Reply

    Just love it,,,keep the idea’s coming I have a grandbaby due in May or June :O) thank you!

    Like

    • Marissa February 22, 2012 at 9:46 pm Reply

      Thanks Joan. I’ve got an idea for a bee using this same pattern next!

      Like

  15. Michelle February 22, 2012 at 9:31 pm Reply

    This is even cuter than the turtle! I’m about half done already and will hop over to fb to post pics as soon as its done. Thanks for the pattern!!!

    Like

    • Marissa February 22, 2012 at 9:46 pm Reply

      Can’t wait! I’ll keep my eyes peeled for it. ;0)

      Like

Drop a Comment!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 9,905 other followers

%d bloggers like this: